RWD Conversion without 3D-Printed Parts
For those who want to convert to RWD without buying additional parts or using any 3D-printed parts.
EZ V1.2 Bulkhead
EZ = Easy. A conversion kit that is relatively easy to assemble
EZ V1.3 Bulkhead
An update to EZ V1.2, featuring a more rigid steering system, but requiring RC Orlandoo Hunter parts
BELL X-M2 V1.0 Bulkhead
The conversion kit uses a bell crank steering system. Installation is a bit more complicated, but it is fully compatible with the stock parts, and the steering performance is quite good.
Transverse Gearbox Mod
This modification converts the motor layout from longitudinal to transverse without modifying the stock gearbox. It also gives you greater flexibility to configure the motor position as a low motor mount, high motor mount, or rear motor mount.
Toe In Setup
3D-printed parts that allow you to adjust the rear wheel toe angle for improved handling.
RC Drift 101
Understand High Motor Position, Tranversal Motor, etc
You'll learn how motor position, motor rotation direction, center of gravity (CG), differential type, and weight transfer all affect the way your RC drift car behaves on the track.
Rear Toe Effect
This video will briefly and quickly explain the effects of rear wheel toe-in and toe-out on RC drift cars.
Parts
Dasmikro Gyro V5 Setup
A really good gyro for mini RC drift cars.
WL Toys Pinion Gear Removal
How to change to bigger servo
Cheap Gyro Test
Other WL 1/28 Videos
How to mount body without magnet
WL Toys 284131 V2 Review VS K969 VS K989
RWD Conversion (Legacy)
Simple Buklkhead Conversion
A simple conversion kit for those who don't want to modify or damage the stock parts.
Affiliate Disclosure & Buying Guide
I earn a small commission from these links at no extra cost to you.
I aim for the best prices, but please ensure the product meets your needs.
If you have any doubts, kindly verify with the seller before purchasing.
